Snuglab 的由来
我们自己就在塑料和弹性体测试实验室工作。每遇到新的试样几何形状,我们都要打印支架、垫块和转接件,而且几乎每次都要返工。
Snuglab 由此诞生:让模型去适应您的尺寸。您只需输入数值,公差、壁厚和可打印性由我们负责。
Snuglab 团队按尺寸定制的 3D 打印文件,适用于实验室、测试车间和工坊
您是否也遇到过?从网上下载并打印了一个支架,结果试管卡住或样品晃动。Snuglab 按您的尺寸生成文件,并自动计入您打印机的配合间隙。
适用人群
每种新的试样形状,都要重新做支架和垫块。
样品架只有标准容器的规格,而您的样品瓶并不标准。
经费紧张,但打印机就在研究所里。
保护钳口总是在最需要的时候找不到。
问题所在
如今很多实验室都有 3D 打印机,但合适的文件依然缺乏。
免费模型是按别人的容器画的。小了半毫米,这次打印就白费了。
每个小改动都意味着打开 CAD、查找尺寸、重新导出。日常实验工作没有这个时间。
成品支架需要订购,几天后才能到货。特殊规格往往根本买不到。
我们自己就在塑料和弹性体测试实验室工作。每遇到新的试样几何形状,我们都要打印支架、垫块和转接件,而且几乎每次都要返工。
Snuglab 由此诞生:让模型去适应您的尺寸。您只需输入数值,公差、壁厚和可打印性由我们负责。
Snuglab 团队| 网上下载 | 自己设计 | Snuglab | |
|---|---|---|---|
| 得到文件所需时间 | 边找边碰运气 | 在 CAD 里花数小时 | 不到一分钟 |
| 第一次打印就合适 | 很少 | 需要多次尝试 | 是,已计入您的打印间隙 |
| 更换尺寸 | 几乎无法修改 | 回到 CAD | 拖动滑块即可 |
| 成本 | 免费,但有废件 | 您的工作时间 |
每个模块都是只需少量参数的参数化模型。新模块来自客户最常提出的需求。
适用于离心管、样品瓶、试管和试样的样品架,可拼接。
可用用于台钳和试验机的卡扣式保护垫,平面、齿纹或带槽。
可用单道和多道移液器壁挂条,可挂装或粘贴。
可用冷杉造型的离心管和试管架。
季节限定实验玻璃器皿造型的圣诞挂饰,液体部分凸起,适合双色打印。
季节限定按试样几何形状标记标距的辅助工具。
计划中按任意内外径定制的变径接头和宝塔接头。
计划中适用于 20、30、40 铝型材的卡扣,槽宽和线径可选。
计划中单道和多道移液器壁挂条,可挂装或粘贴。 调整尺寸,3D 预览后下载 STL。已计入您的打印间隙。
实验室模块
圣诞特别版
圣诞特别版
在移液器和试验机之间增添一点节日气氛。两个午休时间就能打印好、又真正实用的小物件。
真正可用的冷杉造型试管架,带星星和树干。离心管的彩色盖子就成了圣诞球。
锥形瓶、圆底烧瓶和试管造型的圣诞挂饰。凸起的液体部分换一次耗材即可变成红色或金色。
也很适合作为送给团队或客户的小礼物。
计划中的上线价格。配合测试件永久免费。
如果零件不合适,可修改尺寸后免费重新下载。您只为合适的零件付费,而不是为尝试付费。
无需 CAD,无需返工。三步即可把零件放进切片软件。
用卡尺量取直径、钳口宽度或杆部尺寸。常见样品已有模板。
输入数值并实时查看 3D 零件。打印间隙会自动计入。
下载 STL,拖入切片软件,无需支撑即可打印。附带打印说明。
就在这里。Snuglab 不提供固定文件,而是按您的尺寸生成 STL:离心管、样品瓶和试管的样品架,试样支架,台钳夹钳垫块,以及壁挂式移液器支架。
不需要。您只需输入尺寸,并在 3D 预览中检查零件。生成的 STL 文件可直接在切片软件中打开。
任何 FDM 打印机都可以。STL 文件可在所有常见切片软件中打开,例如 Bambu Studio、PrusaSlicer、OrcaSlicer 和 Cura。所有零件的摆放方向都无需支撑。
FDM 打印机打印出的孔通常比设计值略小,打印间隙用于补偿这一点。如果您不知道自己的数值,请打印一次免费的配合测试件,选第一个样品放入后不晃动的孔。
可以。在右上角切换毫米和英寸,所有输入和尺寸都会随之变化。STL 文件本身始终以毫米为单位,因为切片软件默认如此。
支架用 PLA 或 PETG 即可,接触溶剂或高温时建议 PETG。夹钳垫块若需保护样品请用 TPU 95A,需要更强夹持请用 PETG。
可以。文件供您自用及在本公司内部使用,但不得转发或出售文件本身。
Dipl.-Ing. Dr.mont. Bernd Schrittesser
Eisenstädterstraße 24, Walbersdorf
7210 Mattersburg, Austria
Email: hello@snuglab.io
Business purpose: provision of digital templates for 3D printing
Trade licence: engineering office (consulting engineers) in the field of plastics engineering, granted in Austria
Trade authority: Bezirkshauptmannschaft Mattersburg, GISA no. 33380025
Member of the Burgenland Economic Chamber, engineering offices section
Applicable law: Austrian Trade Act (Gewerbeordnung), available at www.ris.bka.gv.at
Exempt from VAT as a small business under § 6 (1) no. 27 of the Austrian VAT Act. Prices do not include VAT.
Snuglab is offered by Bernd Schrittesser as a sole proprietor.
The person named in the imprint is responsible for this site.
Visiting the site. When you open the site, the hosting provider world4you Internet Services GmbH, Austria, processes technical data such as IP address, time and requested address in order to deliver and secure the site.
Configurator. Your dimensions are processed only in your browser. The print file is created on your device and is not transmitted to us. Your browser stores the chosen unit locally.
3D preview. For the preview the site loads a software library from the cdnjs service operated by Cloudflare. Your IP address is transmitted to that provider.
Free download. For free downloads of the lab modules we ask for your email address. We store it together with the number of your downloads in order to keep to the allowance of five free files per address. Your browser remembers the address locally.
News by email. Only if you tick the box and click the link in the confirmation email will we tell you about new modules. You can stop this at any time with an email to hello@snuglab.io.
Email. If you write to us, we use your details only to answer your enquiry.
Cookies and tracking. This site sets no cookies and uses no tracking.
Your rights. You have the right to access, rectification, erasure, restriction and objection, and the right to lodge a complaint with the Austrian data protection authority.