SnuglabLab & testing

From calliper to finished part

No CAD, no rework. Three steps and the part is in your slicer.

  1. Step 1Measure

    Take the diameter, jaw width or shaft with a calliper. Common samples have templates.

  2. Step 2Configure

    Enter the values and check the part live in 3D. Printer clearance is included automatically.

  3. Step 3Print

    Download the STL, drop it into the slicer and print without supports. Print notes are included.

Frequently asked questions

Where can I find STL files for tube racks, sample holders and pipette holders?

Right here. Instead of a fixed file, Snuglab generates the STL to your dimensions: racks for microtubes, vials and tubes, holders for test specimens, vice jaw inserts and wall-mounted pipette holders.

Do I need CAD software?

No. You only enter the dimensions and check the part in the 3D preview. The finished STL file opens directly in your slicer.

Which printers does it work with?

Any FDM printer. The STL opens in all common slicers such as Bambu Studio, PrusaSlicer, OrcaSlicer and Cura. Every part is oriented to print without supports.

What is printer clearance?

FDM printers usually print holes slightly smaller than designed. Clearance compensates for that. If you don’t know your value, print the free fit test once and take the first hole the sample fits without wobbling.

Can I work in inches?

Yes. Switch between millimetres and inches at the top right. All inputs and dimensions follow the setting. The STL file itself is always in millimetres because that is what slicers expect.

Which material should I use?

PLA or PETG is fine for holders, PETG is better with solvents and heat. Print jaw inserts in TPU 95A to protect the sample, or in PETG for more grip.

May I use the printed parts at work?

Yes. The file is meant for your own use and for use within your company. Only passing on or selling the file itself is not permitted.

Calliper already in your hand?

You have the file in a minute and the finished part today.

Configure a part now